我的位置：
- 數字音視工程網/
- 產品中心/
- 產品詳情
巴可BARCO-NjordCinemascopehasapleasingcalmuniformimageandisdesignedforlargescreensorh-Njord Cinemascope 5K UHD projector
廠家報價：面議
產品狀態：(在產)
Theater&MediaRoomSeries5KUHDResolution(5,120x2,160)3-ChipDLPUpto9,000ANSILumens
產品品牌：
巴可BARCO
產品類別：
數字電影放映機
地址：北京市朝陽區太陽宮中路12號冠城大廈12層
電話：400-000-9370、400-882-2726、010-80101166(聯系就說在DAV音視工程網上看到的)
廠商介紹： 巴可BARCO是全球顯示行業領先的技術公司，主要為娛樂、企業和醫療保健市場設計開發網絡可視化和創新協作解決方案。巴可偉視（北京）電子有限公司為中國市場專業市場設計開發可視化解決方案：涉及控制室、國防與航天、數字影院、醫療保健、媒體與娛樂、模擬與虛擬現實。巴可BARCO產品包括專業工程投影機、數字影院... [詳細]
| 投影機類型 | Three chip DLP |
| 技術 | 3 x 0.90" DMD? with sealed core |
| 分辨率 | 5120x 2,160 (5K UHD) |
| 寬高比 | 2.37:1 (CinemaScope) |
| 光源 | Laser phosphor |
| 光源使用期限 | Up to 20,000 |
| 光輸出 | Up to 9,000 ANSI Lumems Dimable to 4,000 lumens NOTE: Up to 6,940 ANSI Lumems @ 110v |
| CLO（穩定光輸出） | Yes |
| 對比度 | 20,000:1 (with DynaBlack enabled) 2,000:1 Sequential 600:1 ANSI |
| 亮度均勻性 | >90% |
| 透鏡范圍 | (R9801661) - TLD+ (0.41:1) - 90 Degree Lens (R9862001) - TLD+ (0.73 -0.94:1) - 90 Degree Lens (R9801414) - TLD+ (0.92 -1.33:1) (R9862005 ) - TLD+ (1.24 -1.56:1) (R9862010) - TLD+ (1.49 -2.02:1) * (R9862020) - TLD+ (2.01 -2.76:1) * (R9862030) - TLD+ (2.69 -4.41:1) * (R9862040) - TLD+ (4.37 -7.35:1) * (R9829997) - TLD+ (6.95 -10.83:1) * Standard Lens Option(s) |
| 光學鏡片移動 | Up to 97% shift up, 76% down, & up to 28% horizontal lens shift (depending on lens selection) Visit the Barco Residential Lens Calculator for further information Download Lens & Airflow Data Here |
| 擋光板 | Yes |
| 色彩糾正 | P7 RealColor? |
| 色階度 | Up to DCI (P3) |
| 圖像處理 | Embedded Warp & Blend Engine |
| WARP | 4-Corner Warp & Bow Correction via Warp Engine |
| 安裝角度 | 360° Rotation |
| 網絡連接 | 10/100 Ethernet via RJ45 connection |
| 集成網絡服務器 | Yes |
| 診斷 | via Prospector web interface |
| HDR | HDR10 |
| 3D | Active Stereoscopic 3D Additional hardware required please contact an authorized Barco representative for details |
| 輸入 | 1 x HDMI 2.0 (HDCP2.2) 2 x HDBaseT (HDCP1.4 - 9Gbps only) 1 x Display Port 1.2 Quad 3G / 12G SDI / BarcoLink 1 x RJ45 Ethernet 1 x RS232 1 x USB 2 x DMX (1 x Input / 1 x Output) 1 x XLR for Wired Remote 2 x 3D Sync (1 x Input / 1 x Output) Optional Upgrade: Quad DP1.2 |
| 輸入分辨率 | HDMI: Up to 4,096 x 2,160 @ 24/25/30/50/60Hz DisplayPort (Single Input): Up to 4,096 x 2,160 @ 24/30/50/60Hz via Optional Quad DP1.2 Input Card DisplayPort (Layout Mode: 2 x 2) * : Up to 1,920 x 1,080 @ 120Hz Up to 2,048 x 1,080 @ 120Hz DisplayPort (Layout Mode: 4 x 1) * : Up to 960 x 2,160 @ 120Hz * Specialist GFX cards may be required |
| 延遲 | TBD |
| 控制 | IR, RS232, IP, 12v Trigger Driver modules available for: Crestron, Control4, RTI & Savant WiFi (Optional), XLR Wired Remote, GSM (Optional) |
| 電力要求 | 110 - 130V / 200 - 240V / 50 - 60Hz |
| 功率消耗 | 110V: 1,347W Max, measured in 20-25°C / 68-77°F 230V: 1720W Max20-25°C / 68-77°F Power consumption will increase if ambient temperatures increses above 25°C / 77°F |
| 噪音級別（典型，25°C/77°F時） | 46 dB(A) |
| 工作溫度 | 0 to 40 °C at Sea Level Optimal Set Point: 20 °C |
| 工作濕度 | 0 to 80% (relative humidity) |
| 每小時BTU | Max. 5,875 BTU/h @ 200 - 240V Max. 4,599 BTU/h @ 110 - 130V |
| 氣流要求 | Air Inlet (from Rear w/Feet Down): Front / Top / Right Exhaust (from Rear w/Feet Down): Rear Clearance Requirements: Front: 40cm Left: 1cm Right: 40cm Rear: 40cm Top: 40cm |
| 排風量 | 152 ft 3 /min @ 25 °C 258 m 3 /hour @ 25 °C Download Lens & Airflow Data Here |
| 尺寸(寬x長x高) | Excluding Lens 540 x 725 x 355 mm 21.26 x 28.54 x 14 in. |
| 凈重 | Excluding Lens 48kg / 105bs |
| 運輸尺寸（寬x長x高） | Including Pallet - Excluding Lens (Packaged Separately) 850 x 665 x 613 mm 33.46 x 26.18 x 24.13 in. |
| 毛重 | TBD |
| 標準配件 | Power Cord / Remote Control |
| 認證 | CE, FCC Class A and cCSAus |
| 安全要求 | This projector may become Risk Group 3 (RG3) when an interchangeable lens with throw ratio greater than 2.3 is installed. Refer to the installation manual for further information. |
| 保修期 | Limited 3 years parts and labor Extendable up to 5 years |
| * | Firmware upgradable Please contact an authorized Barco representative for details |
